Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Torrance Homeowners Choose CWS Construction
We provide independent CWS construction service in Torrance, installing and fitting CWS cabinet packages to spec in real South Bay homes. What makes our CWS work different is field-fit: we square, shim and settle the cabinet run before anything is fastened, so doors close clean and countertops template true. CWS (Cabinet Wholesalers) is a cabinet and kitchen-component supplier, not a remodeling contractor. We’re an independent local service provider, not affiliated with or authorized by CWS. Call (844) 560-5501 for a free estimate.

Why Trust Construction Torrance for Your CWS Construction?
Our technicians have up to 13 years of experience with cabinet product, and that experience matters most in the last inch of the installation. CWS ships boxes, doors and hardware. What it can’t ship is a level line against a wall that’s been moving since the Eisenhower years, which is what most Torrance housing stock gives you.
We work with quality parts that fit CWS equipment: hinges, slides and touch-up finish matched to the cabinet series, plus aftermarket shims, fillers and sealing materials where they outperform what comes in the box. We don’t stock or sell genuine CWS parts, and we’re not a CWS dealer. We install and service the product with parts that fit it.
Warranty-safe service means we don’t do things that void a manufacturer’s coverage. We don’t cut cabinet boxes to force a fit. We don’t drill new hinge bores in a door front. We don’t caulk over a joint that should have been re-squared. If a box is wrong, we document it before we touch it so a replacement claim stays open. That discipline is the whole job, and it’s why an independent installer is worth having on a CWS order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Torrance
Most CWS cabinet problems we see in Torrance come from installation, not from the product. The supplier’s job ends at the pallet. Here’s what goes wrong after that.
- RTA joints loosening. Ready-to-assemble all-plywood shaker boxes come apart at the dowels when they’re assembled without glue and then fastened to a wall that’s out of plane. The box racks, the joint opens, and the whole run gets a wobble you can feel through the countertop.
- Finish and color mismatch between production lots. Door and drawer fronts from different lots can arrive a shade apart. On one cabinet nobody notices. On a full run of uppers under a window it reads as a stripe, and it doesn’t sand or buff out.
- Soft-close hinges and slides drifting. Soft-close mechanisms lose their seat when boxes were never shimmed and leveled before mounting. Doors stop latching flush. Drawers creep open. The hardware usually gets blamed, but the box is the cause.
- Countertop and cabinet mismatch. A CWS quartz or granite slab templated against cabinets that later settle, or that were never squared in the first place, comes back with a reveal that waves along the wall. The stone is fine. The cabinet run wasn’t ready for it.
- Marine-layer moisture and efflorescence at the cabinet wall. Torrance’s cool, damp mornings push condensation into exterior walls and the cabinet backs against them. Touch-up finish fails first, then the bottom rail of a base cabinet, then the caulk line. It’s a Torrance climate problem before it’s a CWS problem.
CWS Parts & Our Repair-vs-Replace Approach
We use CWS-spec hardware matched to the cabinet series so doors and drawers operate as designed, and we bring quality aftermarket shims, fillers and sealing materials where they genuinely outperform what ships in the box. We don’t claim to stock OEM or genuine CWS parts. We source what fits.
Repair comes first when it’s honest. A single damaged door, a loose box that can be re-squared, a hinge that can be re-seated: those get fixed. Replacement is the right call when the finish lot is gone and a matched front can’t be sourced, because a mismatched door on a full run looks worse than the damage it replaced. We’ll tell you which one you’re looking at before any work starts.
Every job is priced per job by a written estimate, and the estimate is free. Call (844) 560-5501 to get one.

Our CWS Service Process – Step by Step
- 1
Diagnosis. We check the cabinet run for level, plumb and square before we look at a single door. On CWS RTA packages we inspect the dowel joints and the wall plane the boxes are fastened to. That’s where the answer usually is.
- 2
Repair or install. We glue and re-seat RTA joints, shim and level the run, set fillers at the wall, and re-hang doors only after the boxes are true. On new installs we template countertops after the run is square and settled, never before.
- 3
Test. Every door and drawer gets cycled through its full travel. Soft-close gets checked for seating. We look for rub at the top corner, which is the first sign a box moved.
- 4
Warranty and finish. We document what was done and with what, we touch up finish on site, and we leave the paper trail intact so a CWS manufacturer warranty claim is still open if a door or box needs replacing later.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Torrance
We install and service CWS ready-to-assemble all-plywood shaker cabinets, CWS assembled solid-wood door cabinets in white and gray shaker, and CWS granite and quartz countertop bundles sold with cabinet packages. We also handle CWS vanity and bath cabinet lines when they’re paired with a kitchen order, which is common on a whole-house CWS purchase. That covers installation, refacing, re-squaring, hardware replacement and countertop templating on the finished run. We don’t claim to stock any of it. We install what you buy and we fit it to your walls.
We Also Service These Brands
CWS is one line among many we work with. We install and service KraftMaid and Wellborn cabinetry, surface kitchens with Cambria and Silestone, and fit Kohler fixtures in the same project. That breadth matters when a Torrance kitchen mixes cabinet lines or when a bath vanity comes from a different manufacturer than the kitchen order. Your project stays with one point of contact instead of three.
FAQs – CWS Construction Service in Torrance
No. We’re an independent local installer and service provider, not affiliated with, authorized by or certified by CWS. We install and service CWS cabinet products with quality parts that fit them. Call (844) 560-5501 if you want a straight answer on what your CWS order needs.
Yes. We match hinges, slides and touch-up finish to the cabinet series so doors and drawers work as designed, and we use aftermarket shims, fillers and sealing materials where they outperform what ships in the box. We don’t stock or sell genuine CWS parts. For a quote on your install, call (844) 560-5501.
Most CWS cabinet installs and re-fits in Torrance take one to three days once the boxes are on site and the wall is ready. A single re-squared run or hinge replacement is often a half day. Countertop templating adds a gap because the stone has to be cut and returned after the cabinet run settles. Call (844) 560-5501 to book an assessment.
We cover CWS ready-to-assemble all-plywood shaker cabinets, assembled solid-wood door cabinets in white and gray shaker, and granite or quartz countertop bundles sold with cabinet packages, plus CWS vanity and bath cabinet lines paired with a kitchen order. We also handle refacing and hardware work on those products. Call (844) 560-5501 with your order details.
Warranty-safe service is the standard we hold, which means we don’t cut boxes to force a fit or drill new hinge bores in a door front, and we document condition before we start so a manufacturer claim stays open. We’re independent, so we can’t speak for CWS on coverage. Keep your purchase paperwork and call (844) 560-5501 before work starts.
Typical estimated ranges for CWS cabinet and countertop work in Torrance run from $800 for a backsplash install up to $45,000 for a full kitchen remodel. The written estimate sets the final price, and the estimate is free. Call (844) 560-5501 for an exact quote.
| Scope | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Book Your CWS Service in Torrance, CA
If a CWS cabinet package is sitting in your garage or a run already installed isn’t closing right, we can help. Our technicians have up to 13 years of experience, the estimate is free, and the written quote is what you pay. Call (844) 560-5501. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Torrance.