Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Torrance Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Torrance – cabinet repair, refacing, and full kitchen installs – with no manufacturer program behind us and no sales quota to hit. What sets our KraftMaid work apart is that we treat it as its own platform: full-overlay door adjustment, coastal finish behavior, and the hinge and slide upgrades that actually last. Our technicians have up to 13 years of experience, and we handle KraftMaid cabinetry as part of a full-scope residential general contracting business that runs from the driveway to the roofline.

One point of contact carries your project. That matters in Torrance specifically, where the building department enforces plan check consistently and a kitchen remodel often pulls in electrical, plumbing, and sometimes structural work under the same permit. We’re not affiliated with, authorized by, or sponsored by KraftMaid. We’re an independent service provider, and we say so plainly because you deserve to know who you’re hiring.
Call (844) 560-5501 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Torrance for Your KraftMaid Construction?
KraftMaid cabinets have quirks you only learn by working on them. The Vantage and Momentum series use full-overlay doors, and over years of daily opening and closing the hinge plates work loose from the cabinet face. The door drifts, the gaps go uneven, and the cabinet looks like it’s failing when the box underneath is perfectly sound. We see this constantly, and it’s almost always a hinge problem, not a cabinet problem.
Finish behavior is the other one. Painted and glazed KraftMaid finishes react to moisture. In South Bay coastal air, a kitchen that runs humid from cooking and cool mornings will show checking and peeling at stile edges long before an inland kitchen does. Knowing that, we approach finish repairs and refacing differently: we address the moisture source and prep the substrate properly rather than slapping on a coat that fails again in two years.
When we source replacement doors, drawer fronts, hinges, and touch-up kits, we match them to the specific KraftMaid cabinet we’re working on, not to whatever’s cheapest in the catalog. Quality aftermarket slides and hinges go in only when they line up with the original mounting pattern so the installation stays clean and the cabinet stays serviceable. That’s what warranty-safe service looks like: we document what we changed, we don’t drill new holes that void a manufacturer’s coverage, and we tell you honestly when a repair is throwing money at a box that’s already failing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Torrance
Here’s what actually comes up on KraftMaid cabinetry in Torrance kitchens. None of these are rare, and none of them mean the cabinets are junk.
- Door and drawer front misalignment and sagging. This is the single most common KraftMaid complaint we hear. On Vantage and Momentum full-overlay doors, the hinge plates loosen from the cabinet face after years of daily use. The door hangs a little lower, the gaps go uneven, and one door starts catching the next. Re-aligning and re-securing the hinges restores the fit in most cases, and it’s far cheaper than replacement.
- Finish cracking and peeling at stile edges. Painted and glazed KraftMaid finishes check and peel around door panels and stile edges in high-humidity coastal kitchens. The marine layer keeps Torrance cool and damp, so kitchens here hold moisture more than inland ones do. It’s a substrate and moisture issue, not a product defect, and it responds to proper prep and refinishing.
- Drawer glide failure on standard side-mount slides. The nylon roller on a side-mount slide wears flat over time. Drawers start to bind, pull unevenly, and eventually drop out of the track. Quality replacement slides that match the original mounting pattern solve it without touching the cabinet box.
- Shelf pin hole elongation and sagging shelves. Heavily loaded wall cabinets, especially older Vantage boxes holding dishware, develop elongated shelf pin holes. The adjustable shelf sags in the middle, and over time the pin hole itself opens up. We repair and reinforce the pin holes so the shelf stays level and the cabinet keeps working.
- Water damage and box failure. The honest one. When the cabinet box has taken on water, swelled, or delaminated, or when the layout no longer makes sense for how you cook, chasing replacement parts is a losing game. Refacing or full replacement is the right call then, and we’ll tell you so rather than sell you a repair that buys you two years.
A common KraftMaid call is a kitchen where the full-overlay doors have drifted out of alignment and the painted finish is checking along the stiles after years of coastal air. The usual cause is loosened hinge plates and seasonal moisture movement in the door substrate rather than a failed cabinet box. A qualified local pro typically re-aligns and re-secures the hinges, replaces worn slides, and either refinishes or refaces the doors – or reconfigures the layout with new KraftMaid boxes when the cabinets are past saving.
KraftMaid Parts & Our Repair-vs-Replace Approach
We use genuine KraftMaid replacement doors, drawer fronts, hinges, and touch-up kits where the cabinet box is structurally sound. That’s the preferred route because it keeps the finish and fit consistent and keeps the cabinet serviceable. Where genuine parts don’t make sense – often because the box is fine but the original hardware has a design limitation – we use quality aftermarket slides or hinges, but only when they match the original mounting pattern. We don’t stock OEM or genuine KraftMaid parts, and we don’t claim to; we source them for your job.
Deciding repair versus replace comes down to three things: is the box solid, does the layout still work, and is the finish recoverable? If all three are yes, repair and refacing save you real money. If the box is water-damaged or the layout no longer fits how you cook, refacing or replacement is the honest answer. We carry options at every price point within cabinetry, so the decision is driven by the cabinet, not by what we have sitting around.
Call (844) 560-5501 for a free written estimate. You’ll know which route makes sense before you commit to anything.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the KraftMaid cabinets specifically: hinge plate mounting, door gaps, slide condition, shelf pin integrity, and finish condition at stile edges. We check the cabinet box for swelling or delamination. In Torrance, we also look at how moisture behaves in the kitchen – ventilation, plumbing leaks, and where the cool coastal air sits – because that’s often the actual cause behind finish problems.
- 2
Repair or install plan. You get a written line-item estimate that clearly separates repairs (hinges, slides, alignment) from replacement (doors, drawer fronts) from a full install or reface. If the cabinet is sound, we say so. If it’s past saving, we say that too.
- 3
Repair or installation. Hinges get re-secured and doors realigned to proper gaps. Worn slides get replaced with quality units matching the mounting pattern. New KraftMaid doors and drawer fronts get installed to spec. Refacing gets prepped properly so the finish holds up to coastal humidity.
- 4
Test and inspection. Every door and drawer is cycled, checked for even gaps and smooth travel, and confirmed flush at the cabinet face. Shelf pins are load-checked. Countertop and backsplash edges are inspected where they meet the cabinets.
- 5
Warranty and documentation. You get a written record of what was replaced, what hardware was used, and what finish work was done. That matters if a KraftMaid warranty question comes up later. Work is backed by our workmanship warranty.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Torrance
We service KraftMaid cabinetry across the Vantage, Momentum, Portrait, and Prelude series. That includes full-overlay door systems, drawer glides, adjustable shelving, painted and glazed finishes, and the hardware that ties it all together. We install new KraftMaid cabinet runs in kitchen remodels, reface existing KraftMaid boxes with new doors and drawer fronts, and handle the surrounding scope – countertops, backsplashes, islands, and the electrical and plumbing rough-in that comes with a kitchen gut-out in Torrance’s older tract homes. Our kitchen design and layout work uses the cabinet specifications to plan spacing, clearances, and appliance integration, so what gets installed actually works in the room.
We Also Service These Brands
KraftMaid is one cabinet line among many, and our kitchen work draws on a broad set of material partners. We spec countertops with Cambria, Silestone, or Caesarstone, and we install fixtures from Kohler and Toto. If your kitchen mixes KraftMaid cabinets with a Cambria island or a Kohler sink, we handle the whole assembly under one project. You get brand choice at every price point, not whatever a single supplier pushes.
FAQs – KraftMaid Construction Service in Torrance
No. We are an independent KraftMaid service provider. We are not affiliated with, authorized by, or sponsored by KraftMaid, and we are not a KraftMaid dealer. We’re not factory-trained or certified by KraftMaid either. What we are is deeply familiar with the platform from daily work on KraftMaid installs and refacing.
Yes. We use genuine KraftMaid replacement doors, drawer fronts, hinges, and touch-up kits where the cabinet box is structurally sound. When genuine parts aren’t the right call, we use quality aftermarket slides or hinges only if they match the original mounting pattern. We don’t stock OEM or genuine KraftMaid parts; we source what your specific cabinet needs.
A hinge realignment and slide replacement on a KraftMaid kitchen is typically a single visit. Door and drawer front replacement or a reface usually takes one to three days depending on kitchen size. A full KraftMaid cabinet installation is part of a larger kitchen remodel timeline, and we give you the schedule with the written estimate. Call (844) 560-5501 for a free estimate.
We service KraftMaid cabinetry across the Vantage, Momentum, Portrait, and Prelude series – doors, drawer fronts, glides, shelving, hardware, and finishes – plus cabinet installation, refacing, and full kitchen remodeling that integrates KraftMaid cabinets with countertops, backsplashes, and islands.
Not when it’s done correctly, and that’s our standard. We don’t drill unnecessary holes, we match hardware to the original mounting pattern, and we document every part replaced so you have a record. That’s what warranty-safe service means in practice. If a warranty question arises, you have the paperwork to back it up.
Often yes. If the Vantage cabinet boxes are structurally sound – no water swelling, no delamination – refacing with new doors and drawer fronts is a genuinely good option and costs far less than full replacement. The boxes are the expensive part. When the boxes are water-damaged or the layout no longer works, replacement is the honest call. Call (844) 560-5501 for a free estimate and we’ll tell you which applies.
Because coastal humidity works on the door substrate over time. Painted and glazed finishes check and peel at stile edges and around door panels in high-humidity kitchens, and Torrance’s marine layer keeps kitchens damp more consistently than inland areas. It’s a substrate and moisture issue rather than a product defect. Proper prep and refinishing resolves it, and we address the moisture source so it doesn’t come back.
KraftMaid uses concealed hinges common to full-overlay cabinetry, and the mounting pattern matters more than whether they’re “standard.” When we replace hinges, we match the original mounting pattern so the door aligns correctly and the cabinet face isn’t damaged. That’s the detail that separates a lasting repair from one that fails in a year.
Refacing a KraftMaid kitchen typically runs one to three days. A full KraftMaid cabinet installation is part of a larger kitchen remodel and the timeline depends on scope – new boxes, countertops, backsplash, electrical, and plumbing all factor in. Plan check with Torrance’s building department also adds time when a permit is required. We give you a realistic schedule with the written line-item estimate, not an optimistic one.
Typical estimated ranges for KraftMaid-related work in Torrance depend on scope. Cabinet installation runs $4,000 – $13,000. A full kitchen remodel runs $14,000 – $45,000, and a small kitchen remodel $9,000 – $20,000. Countertop installation is $2,000 – $6,500, backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. These are estimates and the written estimate sets the final price. Call (844) 560-5501 for an exact quote – estimates are free.
| KraftMaid & Kitchen Service in Torrance | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Book Your KraftMaid Service in Torrance, CA
Whether your KraftMaid doors have drifted out of alignment, the painted finish is checking, or you’re planning a full kitchen remodel with new KraftMaid cabinets, we can help. Call (844) 560-5501 for a free written estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a clear line-item quote and an honest read on repair versus reface versus replace before anything starts.
Written by the team at Construction Torrance.