Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Torrance Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Torrance, and we do it with glass and glazing work that’s matched to the actual opening, not just the panel. Mr-Glass is a glass product line, not a brand we answer to; we fit and service its enclosures, panels and custom glass where Torrance owners choose them, and we source replacement glass and hardware on the open market. Construction Torrance is an independent contractor and is not affiliated with, authorized by, or endorsed by Mr-Glass. If a shower door is dragging, a seal is leaking at the curb, or a panel fogged years ago and never got addressed, call (844) 560-5501. We answer 24/7.

Why Trust Construction Torrance for Your Mr-Glass Construction?
Our technicians have up to 13 years of experience, and on glass work that experience shows up in the details that decide whether an install lasts. A frameless enclosure lives or dies by the wall framing and the curb behind it, so we check plumb and level before we quote a repair. If the backing is drywall where it needs solid blocking, we tell you that up front rather than sealing new glass over a surface that will move again.
Where a panel is a direct fit, we match OEM or spec-equivalent tempered glass. When OEM hinges, clamps, seals or rollers aren’t available, we use quality aftermarket parts rated for the same duty, and we don’t imply any manufacturer authorization by doing it. Torrance’s marine-layer air is hard on hardware, and cheap rollers or untreated clamps fail fast here. We also keep the choices open across the rest of the house: KraftMaid cabinetry, Cambria and Silestone surfaces, Kohler fixtures, all coordinated by one project team from the driveway to the roofline.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Torrance
Glass doesn’t usually fail on its own. Most of what we see in Torrance starts with what’s behind or around the panel.
- U-channels and clamps working loose. The substrate behind the channel moves with seasonal damp and heat cycles, and once that backing shifts, the channel loses its grip. The panel starts to lean or opens a gap at the gasket, and water finds it from there.
- Water migrating past the threshold. When the glass sits on a curb that wasn’t built solid or wasn’t sealed properly, moisture runs under the enclosure and into the curb. By the time it shows up as staining on the bathroom floor, the base needs real attention, not another bead of silicone on top.
- Tempered panel breaking. A knock at an exposed edge, a frame that twists under load, or a door swung past its stop will take out a tempered panel. That’s a replacement, not a patch, and the new panel has to be cut to the actual opening, which is where measurements matter.
- Hard-water clouding and scratched glass. Torrance water leaves mineral film that etches into the surface over time, and it’s especially visible on frameless panels that never get wiped down. Once the glass is scratched rather than coated, polishing won’t bring it back.
- Failing rollers and tracks on sliding enclosures. Coastal humidity, mineral grit and a track that was never quite level wear the rollers out. A door that jumps the track is a safety issue, so we look at the track alignment, the roller condition and the panel weight together.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We don’t stock or sell OEM Mr-Glass parts, and we’re not a Mr-Glass dealer. What we do is source quality parts that fit the equipment: spec-equivalent tempered glass when a panel is a straight swap, and quality aftermarket hinges, clamps, seals and rollers when the original pieces aren’t available. Our decision between repair and replacement comes down to three things: whether the glass itself is sound, whether the panel actually fits the opening, and whether the clamping points are anchored into solid backing. Sound glass and a solid opening? Re-hang and re-seal. A panel the wrong size or fixed to compromised framing? Replacement glass sized to the opening, with the base underneath built right. Call (844) 560-5501 for a free estimate and we’ll tell you which side of that line your enclosure is on.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check plumb and level on the opening, look at where the clamping points land, and find out whether the leak starts at the curb, the jamb seal or the panel itself. On sliding units we inspect the track and rollers.
- 2
Repair or install. Seals and hardware get reset with parts rated for the duty. New glass is cut to the measured opening, not to a nominal size, and anchored into solid backing.
- 3
Test. We run the door through its full swing or slide, confirm the stop catches, and water-test the curb and jambs before we call it done.
- 4
Warranty and documentation. You get the written scope, the parts used, and clear maintenance notes. Where manufacturer warranties apply to materials from other trades on the project, we help you keep the paperwork straight.
Mr-Glass Products We Service & Install in Torrance
We work on frameless glass shower enclosures, both sliding and hinged. We handle fixed glass panels and neo-angle shower enclosures where the angles have to be measured and set correctly or the doors never line up. We also install and replace custom-cut tempered glass and mirrors for bath and interior use. On the remodeling side, that glass work sits inside the broader scope we run in Torrance: walk-in shower installation, tub-to-shower conversion, shower replacement, full bathroom remodels, tile setting and fixture fitting. If your project touches the kitchen as well, we carry that too. One contractor, one point of contact, from the driveway to the roofline.
We Also Service These Brands
Mr-Glass is one line on a much broader material list. We spec KraftMaid and Wellborn cabinetry, Cambria, Caesarstone and Silestone surfaces, and Kohler, Grohe, Moen and Toto fixtures, drawn from more than 50 brand-name manufacturer relationships across every trade. That breadth means a Torrance owner isn’t locked into one line when another brand fits the budget or the room better.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Mr-Glass Construction Cost in Torrance?
Mr-Glass glass work in Torrance typically runs from about $800 for a small glass or surface item up to $28,000 for a full bathroom remodel, depending on scope. The ranges below are typical estimates for the Torrance market. Your written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Tile & Fixture / small glass work | $800 – $2,500 |
What drives the number is rarely the glass alone. The condition of the curb, the framing behind the enclosure, and whether tile has to come out to reach the source of a leak all move the price more than the panel does. Call (844) 560-5501 for an exact quote. Estimates are free.
How Torrance’s Marine Layer and Hard Water Treat Mr-Glass Enclosures
Torrance sits in the South Bay coastal marine layer, and that has real consequences for glass and hardware. Cool, damp mornings mean condensation sits on frames, hinges and clamps far longer than it would inland. On the north side of a house, where damp lingers longest, that moisture works its way into stucco and wood trim and accelerates corrosion on any exposed steel hardware. Add Torrance’s hard water and you get the two things that age a Mr-Glass enclosure fastest: mineral film etching into the glass and mineral grit grinding away at sliding rollers.
This is why more Torrance shower work turns into full tile-and-fixtures scope than owners expect. Permitting here is stricter and more consistently enforced than most of the South Bay, and plan-check on older homes regularly turns up unpermitted add-ons and conversions that have to be resolved before the bathroom permit clears. Failing silicone and a slightly out-of-level track are often the first visible signs that something behind the enclosure has moved. Catch it early and it’s a re-seal and a hardware swap. Let it go and it’s a base rebuild.

How a Mr-Glass Frameless Shower Enclosure Job Usually Goes
A frameless Mr-Glass shower enclosure typically announces itself with a small leak at the curb or a door that drags and won’t stay closed. The usual cause is the wall framing or curb behind the enclosure shifting while the original silicone seal gives out. A qualified installer checks plumb and level on the opening, confirms the clamping points are anchored into solid backing rather than drywall, resets or replaces the glass and hardware, then re-seals the curb and jambs so the enclosure sits square and seals. Where the panel or its anchoring is the problem, the fix is replacement glass sized to the opening and a properly built base underneath. Torrance’s damp air makes that re-seal step matter more here than in drier parts of LA County.
FAQs – Mr-Glass Construction Service in Torrance
No. We are an independent service provider and have no affiliation with, authorization from, or endorsement by Mr-Glass. We service and install Mr-Glass glass products the same way we’d handle any enclosure in a Torrance home: assess the opening, source quality parts that fit, and do the work to spec. Call (844) 560-5501 with questions about your setup.
Yes. We match OEM or spec-equivalent tempered glass where the panel is a direct fit, and use quality aftermarket hinges, clamps, seals and rollers when OEM pieces aren’t available. We don’t stock or sell OEM Mr-Glass parts and we’re not a dealer. Call (844) 560-5501 to talk through what your enclosure needs.
Most hardware and seal work is a same-day visit. Custom-cut glass has to be measured first and then cut, so it adds lead time before the install day. We schedule Sunday through Friday, 7am to 7pm, and we’re closed Saturday. We answer 24/7. Call (844) 560-5501 and we’ll give you a realistic timeline with your estimate.
Frameless glass shower enclosures in sliding and hinged styles, fixed glass panels, neo-angle shower enclosures, and custom-cut tempered glass and mirrors for bath and interior use. If you’re unsure which category your unit falls under, call (844) 560-5501 and describe it.
Not automatically, but warranty terms are set by the manufacturer, not by us, and they generally turn on whether work was done to spec with suitable parts. We keep the scope, the parts used and the measurements documented so you have a clear record. Read your Mr-Glass warranty terms, and ask us before work starts if anything is unclear. Call (844) 560-5501.
Often, yes. If the curb, framing and tile are sound, a single panel replacement or a hardware and seal reset is straightforward. If the backing has moved or the base was never built right, a partial fix won’t hold, and that’s when the scope grows. We’ll tell you which one you’re facing after we look at the opening.
Usually because the wall framing or curb has shifted and the original silicone seal has failed. The enclosure is no longer square, so the door binds and water gets past the threshold. Checking plumb and level on the opening tells you which. Call (844) 560-5501 for a free estimate.
A local pro can source it on the open market. Tempered glass is tempered glass when the thickness, edge work and dimensions match the opening, so a spec-equivalent panel is a legitimate replacement. What matters is measuring to the actual opening, not to a nominal size.
Yes, and it’s one of the better uses of a small Torrance bath. Removing the swing of a framed door and the visual weight of a curtain opens the room up, and a fixed panel with a single hinged door keeps the footprint tight. Call (844) 560-5501 to price it for your layout.
Repair when the glass is sound and the opening is solid. Replace when the panel is the wrong size for the opening or its clamping points are fixed to compromised backing. Scratched or clouded glass from mineral buildup points toward replacement of the panel itself. Call (844) 560-5501 for a free estimate and a straight answer.
Book Your Mr-Glass Service in Torrance, CA
Whether it’s a leaking frameless enclosure, a dragging door, or a full bathroom rebuild around new glass, we’ll look at the opening and tell you honestly what it needs. Our technicians have up to 13 years of experience, estimates are free, and every quote is written line by line. Call (844) 560-5501. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Torrance.