Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Torrance Homeowners Choose Toto Construction
We provide independent Toto construction service in Torrance: repair and installation of Toto toilets, Washlet seats, and integrated smart toilets, plus the bathroom remodeling work that surrounds them. What sets our Toto work apart is focus on the parts that actually fail on these fixtures – flush towers, fill valves, and Washlet electronics – rather than treating them like any generic toilet. We are an independent service provider, not affiliated with or authorized by Toto. Construction Torrance handles the full scope behind the fixture too: subfloor repairs, shutoff valves, tile, and vanity work. Our technicians have up to 13 years of experience. Call (844) 560-5501 for a free estimate.

Why Trust Construction Torrance for Your Toto Construction?
Toto’s fixtures reward the right touch. A Drake gravity-flush tower needs precise alignment to seal cleanly; a one-piece Eco Ultramax needs the tank-to-bowl gasket seated correctly or it will weep under the floor line. We work on these mechanisms often enough that they’re familiar territory for our technicians, who have up to 13 years of experience. That matters when a simple part swap goes sideways because the shutoff is seized or the supply line is mineral-fouled.
For critical components like flush towers and fill valves we use OEM Toto parts, which preserves the fixture’s performance and keeps your manufacturer warranty intact. For non-critical cosmetic items, we can talk through quality aftermarket options if budget is a concern. We are not a Toto dealer, and we don’t claim any factory endorsement. What we bring is an independent shop’s practical knowledge of how this equipment is built to work, and how to get it there again.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Torrance
These fixtures give you a long service life, but the moving parts inside them wear. Here’s what we see most often, matched to what you’ll notice at home.
- Drake flush tower seal failure. The flush tower in a Drake (CST743 series) relies on a rubber seal to hold water between uses. When the seal hardens or grows mineral buildup, water slips past it and the toilet runs intermittently. You’ll hear a short refill cycle minutes after a flush, and the bill creeps up quietly.
- Washlet control board or pump failure. Washlet bidet seats (S550e, C200) house a control board and a small pump for heated water and wash pressure. After years of use, the board can stop responding or the heater quits. On these units the electronics, not the porcelain, are usually the deciding factor.
- Fill valve diaphragm degradation. The rubber diaphragm inside the fill valve ages out. Refill gets slow, noisy, or won’t shut off. On Torrance water this tends to happen faster than owners expect because the South Bay’s harder supply leaves scale behind.
- Tank-to-bowl gasket leaks in Ultramax. One-piece Ultramax toilets (MS854114 series) have a gasket between tank and bowl that ages and can trap mineral buildup. A slow leak can run down the base and stain the floor before you notice water on the tile.
- Marine-layer corrosion on hardware and fittings. Torrance’s cool, damp mornings push condensation onto brass, steel, and chrome fittings. Supply stops, angle valves, and closet bolts rust or seize, which turns a ten-minute repair into a shutoff replacement. We check those fittings before we finish.
Toto Parts & Our Repair-vs-Replace Approach
We don’t keep OEM Toto parts in stock, and we’re not a Toto parts dealer. What we do is order quality parts that fit your fixture exactly – OEM for flush towers and fill valves, since those are the components where a poor fit shows up first – and quality aftermarket for cosmetic or non-critical pieces when you’d rather save on the job.
The repair-or-replace call comes down to the porcelain and the isolation of the fault. If the body of a Drake or Ultramax is sound and the problem is a serviceable part, repair usually wins. If a Washlet’s electronics and pump are both failing at once, or the porcelain has a crack at the base, replacement is the honest recommendation. We’ll tell you which and why.
Call (844) 560-5501 to schedule a free estimate on your Toto repair or bathroom project.
Our Toto Service Process – Step by Step
1. Diagnosis. We test the flush, listen to refill, check the fill valve setting, and (on Washlets) test heating and wash functions. We look for hidden tank-to-bowl leaks on one-piece units and inspect the shutoff and supply components while we’re there.
2. Repair or install. If you’re repairing, we isolate the water, drain the tank, swap the failed part, and check seating and torque. If you’re installing a new fixture or a Walk-In Shower, we prep the rough-in and floor first so the fixture sits level and drains properly.
3. Test. We run multiple flush cycles, verify the fill valve shuts fully, check for seepage at the base, and confirm Washlet functions work game to game.
4. Warranty and paperwork. We use OEM parts on critical components so your manufacturer warranty stays valid, and you get a written line-item estimate so the price you approved is the price you pay.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Torrance
We service and install gravity-flush toilets like the Drake and one-piece models like the Eco Ultramax, and we work on Washlet bidet seats (S550e, C200) when the heating, pump, or controls fail. We also handle Neorest integrated smart toilets, including running the power and water connections they need. Around those fixtures we install foundations: tiled shower surrounds, walk-in shower installs, and vanities. Small bathroom remodels are a natural fit when the fixture work widens into a full refresh. We’re not an authorized dealer, so if you’re buying new, we can help you plan the install – not sell you the unit.
We Also Service These Brands
Torrance homeowners often ask us about adjacent brands in the same project. Alongside Toto, we work with Kohler fixtures, KraftMaid cabinetry, and Cambria and Silestone surfaces for the vanity and bathroom remodels that surround fixture work. One project team, one point of contact, across brands.
FAQs – Toto Construction Service in Torrance
Is Construction Torrance authorized by Toto?
No. We are an independent Toto service provider and not affiliated with or authorized by Toto. We’re not a dealer and we don’t claim factory endorsement – our knowledge comes from hands-on service, not a manufacturer badge.
Do you use quality parts that fit Toto equipment?
Yes. We use OEM Toto parts for critical components like flush towers and fill valves to preserve performance and warranty, and quality aftermarket parts for non-critical cosmetic items when budget matters.
How long does Toto service take?
Most single-fixture repairs are a same-day call once parts are on hand. A seat electronics repair or a full fixture replacement takes a bit longer depending on the model. Call (844) 560-5501 to talk through your situation and get an estimate.
What kinds of Toto products do you cover?
Drake (CST743 series) and Eco Ultramax (MS854114 series) toilets, Washlet seats (S550e, C200), and Neorest integrated smart toilets – plus the bathroom remodeling that goes with them.
Will service void my Toto warranty?
No – proper repair with correct parts won’t void a manufacturer warranty. Using OEM parts on critical components is what keeps it protected. We’re happy to walk through the specifics when we’re on-site.
How much does Toto construction cost in Torrance?
It depends on scope. A small bathroom remodel runs $5,000-$12,000; a walk-in shower install $4,500-$12,000; a vanity install $800-$3,000. For your project, call (844) 560-5501 – estimates are free and the written estimate sets the final price.
- Bathroom Remodel: $9,000-$28,000
- Small Bathroom Remodel: $5,000-$12,000
- Walk-In Shower Installation: $4,500-$12,000
- Bathroom Vanity Installation: $800-$3,000
| Service | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000-$28,000 |
| Small Bathroom Remodel | $5,000-$12,000 |
| Walk-In Shower Installation | $4,500-$12,000 |
| Bathroom Vanity Installation | $800-$3,000 |
Book Your Toto Service in Torrance, CA
Whether a Drake is running, a Washlet has gone cold, or you’re planning a bathroom remodel around a new Toto fixture, we’re ready. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 560-5501 for a free estimate. One point of contact, written line-item pricing, and work done to spec.
Written by the team at Construction Torrance.